AUTONET TV

A Bumpy Ride (Strut Assembly Replacement)

If you’ve noticed your vehicle’s ride has lately been bumpy or you’re hearing strange noises when you drive over bumps, you may need new struts.   The strut assembly is part of your vehicle’s suspension system that’s used to absorb the irregularities on the surfaces you drive on.

You have probably heard of shocks or shock absorbers.  A shock is a piston with gas or liquid inside.  When you hit a bump, that shock absorbs the blow. Struts are similar to shocks but they also have a coil spring for extra strength.  They’re often used in the front of the vehicle because of the engine’s extra weight. 

As you might imagine, your struts take a beating every day.  Eventually, they will wear out, and your wheels and tires won’t stay connected to the road as well as they used to. In addition to a bumpier ride, you may notice your tires starting to wear with failing struts because those tires aren’t in contact with the road surface as evenly as they used to be. 

When you bring your vehicle in to us, we’ll run some tests to determine what’s going on and what condition your suspension components are in.  Your vehicle’s manufacturer recommends struts to be replaced at certain intervals, and it’s important to change them out with the same type of equipment.  They should always be replaced in pairs on the same axle. 

After your struts are replaced, your suspension should be aligned so everything is headed down the road in the right direction. After that, driving should be smooth sailing.

S T Foreign Auto Service
415 E Brighton Ave.
Syracuse, NY 13210
315-478-2161
http://www.stforeignauto.com

3 Winter Windshield Tips (Care of Windshield)

Cold weather can present some real challenges when it comes to your vehicle's windshield.  Think of it.  Your windshield is your window to the world when you're driving, and clear visibility is extraordinarily important for safe travels. So here are 3 tips to ensure that your windshield can do its job during the cold weather.

1. Don't ever pour hot water on a frozen windshield.  Let's say you head outside and see your vehicle covered with ice. You think, hey, maybe I can heat up a pot of water on the stove and melt that off fast.  Don't do it!  You run the risk of shattering the glass the second that hot water hits the frigid glass.  Ditto for using a propane torch.  Glass does not do well with sudden temperature changes.  Instead, turn on your engine and start the defroster, which heats the windshield up gradually.  Use a plastic scraper designed for windshields (don't EVER use metal to scrape) and be patient.  Don't hammer on the ice to break it into pieces.  Sudden pressure and glass don't mix.
2. Keep your wiper blades up off the glass.  If you park your vehicle outside and you think there's a chance of frozen precipitation falling, do what smart winter drivers do.  Lift the wiper arms off the glass and leave them extended with the blades not touching the glass at all.  That way when you go back to your vehicle, you won't have to try to pull the wipers off the icy glass (which can damage the rubber blades) or start the wipers with them frozen solid to the windshield.  Many drivers have burned out their wiper motor that way, and that can be a pricey repair.
3. Keep your windshield washer fluid topped off and use it often.  So you've followed the steps above and you're on the road. Salt, brine and sand can muck up the windshield fast, causing your wiper blades to smear the glass, re-freeze the icy snow and blind you.  It's important to use wiper fluid made for low temperatures so it doesn't freeze on your glass.  Use it often so any road debris won't scratch the glass like sandpaper.  And make sure your defroster is working properly, keeping your windshield warm enough to prevent ice from forming.  

S T Foreign Auto Service
415 E Brighton Ave.
Syracuse, NY 13210
315-478-2161
http://www.stforeignauto.com

Got it Covered! (Timing Cover Maintenance)

You may have heard at one time or another about something called a timing belt or timing chain in your engine.  And you may know that if they fail… well, let's just say that there can be some major engine damage.  So obviously, we want our timing belts and chains to be in tip-top shape.

One part that helps keep them running the way they should is the timing cover.  As you can probably guess, it's something that covers the belt or chain.  The timing cover protects both belts and chains from dirt and road debris.  Timing belts also need to be lubricated so their covers allow them to be lubricated as well.  They have a gasket that insures a good seal for the engine.  If that gasket breaks or develops a leak, then engine oil can escape, and loss of lubrication is never good for an engine component.

Other symptoms of a failed timing cover are leaking coolant, a metallic sound coming from the front of your engine or your Check Engine light coming on.  You might also notice a drop in power when you're going uphill.

It's important that your timing cover be in good condition and functioning properly.  Your repair facility will check out that part of your engine to make sure gaskets are in good shape and the cover is doing the job it's meant to do.  Catch that leaking or broken timing cover in time and your engine will thank you for avoiding some serious damage and an expensive repair.

S T Foreign Auto Service
415 E Brighton Ave.
Syracuse, NY 13210
315-478-2161
http://www.stforeignauto.com